6. เครื่องมือทดสอบคุณภาพเยื่อกระดาษ (PULP TESTING)

Our Pulp Testing Machines represents the latest dimension in testing verification. With a vast array of products to perform numerous tests, one will be given the ability to increase the efficiency and durability of their testing material. Our Pulp Testing equipment provides the ability to test the various beater mill PFI or VALLEY type, Disintegrator, Sheet Former, Freeness Tester, Wet Presse....   We can meet the needs of global markets that have a wide range of products, facilities and budget constraints.

PFI (type)Mill

For use in the laboratory for beating of chemical pulps under standardized conditions and also for the defibration of semi-digested raw material fibres Applicable standards: ISO 5264/2      DIN-EN 25264-2     SCAN C 24     TAPPI T248    PAPTAC

Standard Features

High economic for a fast operation and small volume of pulp (30 g)

Can beat from 5 to 40 g of pulp in concentrations from 5 to 50 % (max. 450 ml of suspension)

Excellent repetitive to be used in quality control and research

Security element protection for the user and equipment
Up and down beater cylinder by electric automatic operation

Refiner type PFI Mill Beater catalog

Valley Beater

Beater type “Valley” for laboratory beating of pulps under standardized conditionsAccording to standards: ISO 5264/1 - SCAN C 25 - TAPPI T200 & 205 - PAPTAC C.2

Standard Features

Beating tank made of stainless steel

Repeatable and adjustable beating pressure by means of a weighted lever

Volume of tank: 35 litres

It allows to work out the used strength to obtain the wished freeness value

Sample size: 360 g

Carrying out coloring tests and mass pasting

Security cover – CE mark

Refiner type VALLEY Beater catalog

Fibres Classifier Bauer Mc Nett type

According to standards: TAPPI T233  -  SCAN M6  -  PAPTAC C.5V…

Standard Features

Manufactured in stainless steel

Each classifying station has its own agitator activated by a general motor of 0,15 CV

Easy replacement screen frames

CE Marked

The standard version is supplied with :

1st Station, sieve of a mesh opening of 1,168 mm. ( 14 mesh)

2nd Station, sieve of a mesh opening of 0,589 mm. (28 mesh)

3rd Station , sieve of a mesh opening of 0,295 mm. (48 mesh)

4th Station, sieve of a mesh opening of 0,147 mm. (100 mesh)

5th Station, sieve of a mesh opening of 0,074 mm. (200 mesh)

NOTE: Other sieves of a mesh opening can be supplied

Fibers Classifier catalog

Pulp Disintegrator

For the standardized disintegration of Paper Pulp suspension. Applicable standards: ISO 5263, SCAN C.18/M2, UNE 57026, TAPPI T205, NF Q 50002 , PAPTC C6...

Standard Features

New Design, modern and compact

Made of stainless steel

Movable top, easy to clean

Digital pre-selection of the revolutions

High-performance motor of low voltage

Low noise level

Electronic parts protected and installed in the upper part

Acryl container according standard (optional made of stainless steel)

Mechanical and electrical safety with additional stop button

Digital display: 2 lines

Easy and ergonomic use

Disintegrator catalog

Manual Sheet Former

To manufacture paper samples in the Laboratory, according to:  ISO 5269/2 - DIN 54.358 parte 1 - UNE 57.042/2 - NF Q 50.002

Standard Features

A base in communication with the formation recipient

A grill covered with a metallic mesh

A cylinder of transparent plastic.

This cylinder is adjusted  to the circular grill
An aspiration system in form of siphon.

OPTIONAL: White Water Recirculation Systems

Manual Sheet Former catalog
White Water Recirculation System catalog WWRS

Manual Hydraulic Presse

Press designed for the process of press-drying of the wet sheet of paper, obtained in the FH.01 sheet former.

Standard Features

Capacity to 5 Kg/cm2

Manual operation pump

For 215 mm paper samples of diameter

Para hojas de 215 mm de diámetro
Gauge of control of the pressure

Wet Presse catalog

Freeness Tester Scopper-Riegle type

To determine the refining degree and draining velocity of paper fibres, according to: ISO 5267/1 - SCAN C 19/M3 - NF Q 50-003 -  BS 6035/1…

Standard Features

Quick clamping of the sample (by spring)

Easy to use and clean 

Stainless steel

Robust equipment
Ergonomic

Freeness Tester Schopper-Riegle Method catalog